
Renovating old tile joints saves money and makes cleaning easier.
ElaGrout tile joint restorer renews the color and density of tile joints quickly and easily!
Renovate tile grouts easily with ElaGrout
Do you want to refresh tiled surfaces quickly and effortlessly? ElaGrout is the perfect solution that gives your grout a new color and long-lasting tightness in just a few easy steps. This innovative product is suitable for both restoration and preventive care. The end result is clean, fresh and like new tile grouts!
Why choose ElaGrout?
- Fast and easy to use: Three simple steps.
- Long-lasting protection: A refreshed look and durable protection.
- Color renewal options: Choose from six shades.
- Versatility: Suitable for most grout lines, as long as they are at least 1 mm deeper than the tiles.
This is how you succeed!
Step 1: Washing
To ensure good adhesion, clean the grout lines carefully.
- Use Cleaner detergent mixed with 2 liters of water.
- Moisten the joints with water and apply the detergent with a sponge on the surface of the joint mortar.
- Brush thoroughly with a white brush and finally wipe with a damp towel.
TIP! The cleaner the surface, the better the coating will adhere.
Step 2: Application
- Shake the Colour Coating bottle for at least 30 seconds.
- Replace the cap with a Luer-Lock cap and attach the application tip.
- Use the application tip and a wooden application brush.
- Position the tip over the grout and gently squeeze the bottle.
- Start with horizontal grout lines and then proceed to vertical ones. Perform Step 3 after completing both phases.
- Choose an appropriate area to coat (approx. 0.5–2.0 m²). The size depends on tile dimensions and grout density. For example, with 10×10 cm tiles, a suitable working area for a single person is about 0.5 m².
- Slowly glide the brush along the grout line and ensure even application.
- Note: Avoid using too much coating to prevent spreading over the tile surface.
Step 3: Finishing
- Lightly dampen the pink cloth.
- Wipe off excess coating from the tiles carefully, avoiding contact with the grout lines.
- Tip: Fold the cloth to get multiple clean surfaces for wiping.
- Once all grout lines are dry (approx. 10 minutes), use the damp pink cloth to remove any remaining residue from the tiles.
- Allow to dry for 8 hours to ensure the coating fully hardens.
- Any remaining Colour Coating residues can be removed with a dry white finishing cloth.
- Wet areas should be allowed to dry for 24 hours before use.
- For bathroom floors, we recommend a drying time of 72 hours.
Note!
- Cracks and holes: Repair broken joints before using ElaGrout.
- Tile type: Not suitable for porous or unglazed tiles that absorb liquid.
- All tools are reusable. Wash used tools with lukewarm water to prepare them for future use.
Renovate the look of your home effortlessly!
ElaGrout makes repairing joints easy and offers a fresh, modern look to tiled surfaces. Choose your favorite shade and start today – the look of the entire space will change in an instant!